Aluminum 7075 Studs
Last updated
Economic choice for light-weight strength
Need help choosing a material?
-
Lightweight at about 1/3 the weight of steel
- Good fatigue resistance and toughness
- Aluminum 7075 strength chart
- Mechanical properties of Aluminum 7075
- Chemistry and specifications of Aluminum 7075
- Aluminum 7075 datasheet
Aluminum 7075 fasteners are most commonly used for their combination of high strength and low weight. Alloyed primarily with zinc, they exhibit strength that is comparable to many grades of steel at a fraction of the density. Aluminum 7075 can be tempered to several different conditions (including 7075-T6) which offers different levels of strength. Commonly used for high-stress aircraft parts, Aluminum 7075 bolts offer good fatigue resistance and toughness.
Compared to aluminum alloy 2024, 7075 bolts are typically used in applications where high strength and low weight are critical, whereas 2024 is more suited for cyclic fatigue. When weighing their attributes against 6061 which is structural aluminum, 6061 offers better corrosion resistance and machinability, but does not have the same high strength as aluminum 7075 fasteners.
Key Attributes
- High strength compared to other aluminum alloys
- Lightness: Aluminum weighs about one third of steel
- Good fatigue strength
- Good ductility and toughness
- Economic strength-to-weigh ratio
- Low density
- Non-magnetic
- Usable to ~752˚F / 400˚C
Aluminum 7075 Fastener Styles
Aluminum 7075 Screws
- 12 Point Screws
- Button Head Cap Screws
- Flat Head Screws
- Hex Head Cap Screws
- Pan Head Screws
- Security Screws
- Set Screws
- Socket Head Cap Screws
- Vented Screws
Standards
- DIN 603 / ISO 8677
- DIN 912 / ISO 4762
- DIN 913 / ISO 4026
- DIN 914 / ISO 4027
- DIN 915 / ISO 4028
- DIN 916 / ISO 4029
- DIN 921
- DIN 931 / ISO 4014
- DIN 933 / ISO 4017
- DIN 961 / ISO 8676
- DIN 965 / ISO 7046
- DIN 966 / ISO 7047
- DIN 7991 / ISO 10642
- DIN 7380 / ISO 7380
- DIN 84 / ISO 1207
- DIN 85 / ISO 1580
- DIN 34822
- DIN 34821
- DIN 7504 / ISO 15480
- DIN 7984
- DIN 963 / ISO 2009
Aluminum 7075 Nuts
Standards
- DIN 439 / ISO 4035
- DIN 934 / ISO 4032
- DIN 985 / ISO 7040
- DIN 986
- DIN 980 / ISO 7042 / ISO 19513
- DIN 6923 / ISO 4161
Aluminum 7075 Washers
Standards
- DIN 125 / ISO 7089 / ISO 7090
- DIN 126 / ISO 7091
- DIN 127 / ISO 7090
- DIN 9021 / ISO 7093
Aluminum 7075 Chemistry & Specifications
Aluminum 7075 Specifications: UNS A97075, QQ-A-200/11, AMS-QQ-A-200/11, ASTM-B211, AMS 4154
| Aluminum 7075-T6 | Al | Zn | Mg | Cu | Fe | Si | Mn | Ti | Cr | Other |
|---|---|---|---|---|---|---|---|---|---|---|
| Typical % | Bal | 5.1-6.1 | 2.1-2.9 | 1.2-2.0 | 0.50 | 0.40 | 0.30 | 0.20 | 0.18-0.28 | 0.05 each / 0.15 total |
| Alloy Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation (%) | Modulus of Elasticity | Density |
|---|---|---|---|---|---|
| 7075-O | 33 | 15 | 16 | 71.7 GPa | 10400 ksi | 2.81 g/cc | 0.102 lb/in³ |
| 7075-T73 | 73.2 | 63.1 | 13 | 72.0 GPa | 10400 ksi | 2.81 g/cc | 0.102 lb/in³ |
| 7075-T6 | 83 | 73 | 11 | 71.7 GPa | 10400 ksi | 2.81 g/cc | 0.102 lb/in³ |




















