Skip to main content
Extreme Bolt & Fastener
Quote

Aluminum 7075 Screws

Last updated

Economic choice for light-weight strength

Need help choosing a material?

Aluminum PixabayFree Airplane

Aluminum 7075 fasteners are most commonly used for their combination of high strength and low weight. Alloyed primarily with zinc, they exhibit strength that is comparable to many grades of steel at a fraction of the density. Aluminum 7075 can be tempered to several different conditions (including 7075-T6) which offers different levels of strength. Commonly used for high-stress aircraft parts, Aluminum 7075 bolts offer good fatigue resistance and toughness.

Compared to aluminum alloy 2024, 7075 bolts are typically used in applications where high strength and low weight are critical, whereas 2024 is more suited for cyclic fatigue. When weighing their attributes against 6061 which is structural aluminum, 6061 offers better corrosion resistance and machinability, but does not have the same high strength as aluminum 7075 fasteners.

Key Attributes

  • High strength compared to other aluminum alloys
  • Lightness: Aluminum weighs about one third of steel
  • Good fatigue strength
  • Good ductility and toughness
  • Economic strength-to-weigh ratio
  • Low density
  • Non-magnetic
  • Usable to ~752˚F / 400˚C


Aluminum 7075 Fastener Styles

Aluminum 7075 Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View Aluminum 7075 Screws

Aluminum 7075 Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View Aluminum 7075 Bolts

Aluminum 7075 Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View Aluminum 7075 Nuts

Aluminum 7075 Threaded Products

Standards

  • DIN 975
  • DIN 976
View Aluminum 7075 Threaded Products

Aluminum 7075 Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View Aluminum 7075 Washers

Aluminum 7075 Chemistry & Specifications

Aluminum 7075 Specifications: UNS A97075, QQ-A-200/11, AMS-QQ-A-200/11, ASTM-B211, AMS 4154

Aluminum 7075-T6 — table
Aluminum 7075-T6AlZnMgCuFeSiMnTiCrOther
Typical %Bal5.1-6.12.1-2.91.2-2.00.500.400.300.200.18-0.280.05 each /
0.15 total

Aluminum 7075 Mechanical Properties

Alloy Temper — table
Alloy
Temper
Tensile
Strength
(ksi)
Yield
Strength
(ksi)
Elongation
(%)
Modulus of
Elasticity
Density
7075-O33151671.7 GPa | 10400 ksi2.81 g/cc | 0.102 lb/in³
7075-T7373.263.11372.0 GPa | 10400 ksi2.81 g/cc | 0.102 lb/in³
7075-T683731171.7 GPa | 10400 ksi2.81 g/cc | 0.102 lb/in³

Aluminum 7075 Strength Chart

Aluminum 7075-T6 yield stress vs. temperature (100 h exposure), compared with 2618-T6 and 2219-T6 alloys.


Aluminum 7075 Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
12 point screws are most often used for applications that need a higher torque bolt than a socket head cap screw. We offer 12 points in 1/4" diameter or larger. The only drawback is Aluminum 7075 12 point screws are less economical and require a high minimum quantity due to the complexity of production.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
For a wide-clamping area and low-profile fastener, Aluminum 7075 button head cap screws are an ideal choice. Button head screws are also used when you must fasten a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
Flat head screws have a standard 82° countersink angle and typically feature a slotted or socket driver. Aluminum 7075 flat heads are also available with angles ranging from 60° -120° upon request. Phillips, torx and tamperproof drivers are also available depending on size, quantity and material.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
Aluminum 7075 hex head cap screws are the most common fastener. They have an added washer face providing tighter dimensional tolerances over a hex bolt which lacks this element. Aluminum 7075 hex head cap screws provide high clamping force and easy access.
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Aluminum 7075 pan head screws have a rounded head and are ideally used for small diameter and low torque applications. They typically feature a slotted driver.
Security Screws
When applications demand unwanted removal or tampering, Aluminum 7075 security screws provide protection because they cannot be unfastened using an common driver. Tamper-proof screws are produced in a wide variety of head styles, as well as custom per print.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
Aluminum 7075 set screws have no head. This  fastener has a slotted or socket driver on one end and a unique point on the other. Set screws are available with cup, cone, flat, dog and half-dog points.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
Aluminum 7075 socket head cap screws are ideal for low clearance applications that require a safe and secure fastener.
Vented Screws
Aluminum 7075 vented screws provide a way to out-gas application contaminents through a vertical hole drilled from the screw head through the threaded shaft. Vented screws are ideal for vacuums / high vacuums. Nimonic vented screws are available a variety of head styles.

More Aluminum 7075 products

Questions?

Our material experts are ready to help guide you through your specific application.