A4-100 Threaded Rod
Last updated
High tensile strength A4-100 stainless steel
Need help choosing a material?
- Provides the excellent corrosion resistance of 316 stainless steel
- A4-100 high strength bolts offer 145 ksi UTS/116 ksi yield
- Chemistry and specifications of A4-100 bolts
Austenitic stainless steel A4-100, is a high strength cold worked version of 316 stainless steel. While the chemistry of A4-100 fasteners is similar or equivalent to other A4 fasteners like A4-70, A4-80, ASTM F593 Group 2 and ASTM A193 B8 Grades, it’s primarly difference is its high strength generated from cold-working. A4-100 bolts are cold-worked to the highest levels attainable in 316 stainless steel to achieve maximum strength without sacrificing ductility. This results in 1000MPa / 145 KSI minimum ultimate tensile strength and a minimum yield strength of 800 MPa / 116 KSI. These strengths significantly outperform the strengths of other 316 fastener grades such as ASTM A193 B8 Class 1 and 2, ASTM F593 Group 2 (CW1, CW2, SH1, SH2), A4-70, and A4-80 fasteners. Click here for material strength comparison chart.
A4-100 stainless steel fasteners are an economical alternative to heat-treated superalloys, like A286 (ASTM A453 Grade 660) and 17-4PH stainless steel (ASTM A564 Grade 630) for high strength applications that do not require extremely high temperature resistance. Additionally, A4-100 fasteners are a great alternative to high strength alloy steels, which typically corrode in moist air.
A4-100 Stainless Steel Fastener Styles
A4-100 Screws
- 12 Point Screws
- Button Head Cap Screws Screws
- Flat Head Screws
- Hex Head Cap Screws
- Pan Head Screws
- Set Screws
- Socket Head Cap Screws
- Vented Screws
Standards
- DIN 603 / ISO 8677
- DIN 912 / ISO 4762
- DIN 913 / ISO 4026
- DIN 914 / ISO 4027
- DIN 915 / ISO 4028
- DIN 916 / ISO 4029
- DIN 921
- DIN 931 / ISO 4014
- DIN 933 / ISO 4017
- DIN 961 / ISO 8676
- DIN 965 / ISO 7046
- DIN 966 / ISO 7047
- DIN 7991 / ISO 10642
- DIN 7380 / ISO 7380
- DIN 84 / ISO 1207
- DIN 85 / ISO 1580
- DIN 34822
- DIN 34821
- DIN 7504 / ISO 15480
- DIN 7984
- DIN 963 / ISO 2009
A4-100 Nuts
Standards
- DIN 439 / ISO 4035
- DIN 934 / ISO 4032
- DIN 985 / ISO 7040
- DIN 986
- DIN 980 / ISO 7042 / ISO 19513
- DIN 6923 / ISO 4161
A4-100 Washers
Standards
- DIN 125 / ISO 7089 / ISO 7090
- DIN 126 / ISO 7091
- DIN 127 / ISO 7090
- DIN 9021 / ISO 7093
| A4 Stainless Steel | Cr | Ni | Cu | Mo | Mn | Si | C | P | S |
|---|---|---|---|---|---|---|---|---|---|
| % | 16.0 – 18.5 | 10.0 – 15.0 | 4.00 | 2.0 – 3.0 | 2.0 | 1.0 | 0.08 | 0.045 | 0.030 |
*For austenitic stainless steels having a maximum carbon content of 0,030 %, nitrogen may be present but shall not exceed 0,22 % * At the discretion of the manufacturer the carbon content may be higher as necessary in order to obtain the specified mechanical properties for larger diameters, but shall not exceed 0,12 % for austenitic steels. | |||||||||
| Property class | Tensile strength (ksi) | Yield Strength (ksi) at 0.2% Offset |
|---|---|---|
| A286 (aged) Cold Worked | 160 | 120 |
| A4-100 | 145 | 116 |
| 17-4PH (H1150) | 135 | 105 |
| A286 (aged) ASTM A453 | 130 | 85 |
| F593 Group 2, SH1 | 120 | 95 |
| A4-80 | 116 | 87 |
| F593 Group 2, CW1 | 100 | 65 |
| ASTM A193 B8 Class 2 | 125 | 100 |
| A4-70 | 101 | 65 |
| ASTM A193 B8 Class 1 | 75 | 30 |
| A4-50 | 72 | 30 |

















