Skip to main content
Extreme Bolt & Fastener
Quote

A4-100 Screws

Last updated

High tensile strength A4-100 stainless steel

Need help choosing a material?

Pexel Free SpaceXSatellite3

Austenitic stainless steel A4-100, is a high strength cold worked version of 316 stainless steel. While the chemistry of A4-100 fasteners is similar or equivalent to other A4 fasteners like A4-70, A4-80, ASTM F593 Group 2 and ASTM A193 B8 Grades, it’s primarly difference is its high strength generated from cold-working. A4-100 bolts are cold-worked to the highest levels attainable in 316 stainless steel to achieve maximum strength without sacrificing ductility. This results in 1000MPa / 145 KSI minimum ultimate tensile strength and a minimum yield strength of 800 MPa / 116 KSI. These strengths significantly outperform the strengths of other 316 fastener grades such as ASTM A193 B8 Class 1 and 2, ASTM F593 Group 2 (CW1, CW2, SH1, SH2), A4-70, and A4-80 fasteners. Click here for material strength comparison chart.


A4-100 stainless steel fasteners are an economical alternative to heat-treated superalloys, like A286 (ASTM A453 Grade 660) and 17-4PH stainless steel (ASTM A564 Grade 630) for high strength applications that do not require extremely high temperature resistance. Additionally, A4-100 fasteners are a great alternative to high strength alloy steels, which typically corrode in moist air.



A4-100 Stainless Steel Fastener Styles

A4-100 Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View A4-100 Screws

A4-100 Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View A4-100 Bolts

A4-100 Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View A4-100 Nuts

A4-100 Threaded Products

Standards

  • DIN 975
  • DIN 976
View A4-100 Threaded Products

A4-100 Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View A4-100 Washers

 


A4-100 Stainless Steel Chemistry and Specifications

A4-100 SPECIFICATIONS: ISO 3501-6, UNS S31600

A4 Stainless Steel — table
A4 Stainless
Steel
CrNiCuMoMnSiCPS
%16.0 – 18.510.0 – 15.04.002.0 – 3.02.01.00.080.0450.030
*For austenitic stainless steels having a maximum carbon content of 0,030 %, nitrogen may be present but shall not exceed 0,22 %
* At the discretion of the manufacturer the carbon content may be higher as necessary in order to obtain the specified mechanical properties for larger diameters, but shall not exceed 0,12 % for austenitic steels.


A4-100 Stainless Steel High Strength Comparison Chart

Property class — table
Property
class
Tensile
strength
(ksi)
Yield Strength
(ksi)
at 0.2% Offset
A286 (aged) Cold Worked160120
A4-100145116
17-4PH (H1150)135105
A286 (aged) ASTM A45313085
F593 Group 2, SH112095
A4-8011687
F593 Group 2, CW110065
ASTM A193 B8 Class 2125100
A4-7010165
ASTM A193 B8 Class 17530
A4-507230

A4-100 Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
A4-100 12 point screws are typically used for high torque applications. The only drawback is they are less economical than socket head cap screws, due to the complex head design. Available in 1/4" or larger sizes.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
A4-100 button head socket cap screws are often used when a wide clamping area and low profile is required. These screws are also a good choice for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
A4-100 flat heads are mostly offered in an 82° angle, but can also be customized to 60°-120° angles. These screws are designed to be flush with the surface. A4-100 flat head screws are available in slotted and socket drivers. Phillips and torx can also be made in high quantities.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
A4-100 hex head cap screws feature an added washer face under the head which provides tighter dimensional tolerances than a hex bolt without the washer face. They are ideal for high clamping force and applications with ease of access. 
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
A4-100 pan head screws have a rounded head and often feature a slotted driver. They are best for small diameter and low torque applications.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
A4-100 set screws are a headless fastener with a slotted or socket driver on one end and a point on the other: cup, cone, flat, dog or half-dog point.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
A4-100 socket head cap screws are a safe and reliable fastening solution when there is limited accessibility and little clearance.
Vented Screws
A4-100 vented screws have a vertical hole drilled from the top of the head to the bottom of the threads. This allows gases and other contaminents to vent. Vented screws are available in almost any head style.

Questions?

Our material experts are ready to help guide you through your specific application.