A286 Flanges
Last updated
Alloy 660 with excellent high temperature oxidation resistance
Need help choosing a material?
- Good material for high temperature oxidation resistance
- Maintains high strength at elevated temperatures
- A286 Chemistry, specs, and heat treatments
A286 flangesor Alloy 660 are known for their high strength, creep resistance and oxidation resistance at elevated temperatures. This iron-nickel-chromium alloy (once age-hardened) provides A286 flanges with high levels of strength from room temperature up to about 1300°F (700°C).
A286 flanges are mildly corrosion resistant. While they should not be used for strong acid environments, they provide excellent oxidation resistance up to 1300°F (700°C) in conditions that would typically be found in high temperature exhaust streams.
Because of the properties of Alloy 660, A286 flanges are often found in high temperature engine, manifold, exhaust and turbine applications as well as off-shore oil & gas applications.
Flange Types Available: Blind Flanges, Lap Joint Flanges, Slip On Flanges, Socket Weld Flanges, Threaded Flanges, Weld Neck Flanges
A286 Chemistry, Specifications & Heat Treatments
A286 Heat Treatments: There are several heat treatment combinations for A286 all with slight variations in performance. They can be specified via an AMS number or a 660 Class: A, B, C or D, with most common specified as class A or D. The A286 grades A, B and C all have the same min tensile strength and min yield strength of 130ksi and 85ksi respectively. However grade D is significantly better yield with a min tensile of 130ksi and a min yield of 105ksi.
By AMS numbers, the most common for A286 is AMS 5737 (same as Grade A) and then AMS 5732 (same as Grade B).
A286 Specifications: UNS S66286, AMS 5525, AMS 5732, AMS 5737, AMS 5804, EN 1.4980, GE B50T1181, GE B50T12, GE B50T81, Werkstoff 1.4980
| A-286 | Fe | Ni | Cr | Ti | Mn | Mo | Si | Co | Va | Al | C | P | S | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 24.0 | 13.5 | 1.9 | 1.0 | 0.1 | 0.003 | |||||||
| Max % | Bal | 27.0 | 16.0 | 2.35 | 2.0 | 1.5 | 1.0 | 1.0 | 0.5 | 0.35 | 0.08 | 0.025 | 0.025 | 0.01 |



