17-4 PH Slip On Flanges
Last updated
An extremely strong precipitation hardened stainless steel
Need help choosing a material?
- Well suited for high strength applications
- Up to 4x stronger than 316 stainless steel
- Maintains its mechanical strength up to 600°F
- 17-4PH Chemistry & Specifications
- Slip on flange features and benefits
17-4 PH slip on flanges are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 stainless steel, 17-4 PH slip on flanges yield strength is up over 4 times greater. When compared to Duplex 2205 slip on flanges, the yield strength of 17-4 PH can be up to 2-½ times greater.
17-4 slip on flanges are available in 8 different aged (precipitation hardened) conditions offering a variety of mechanical properties (see below).
Flange Types Available: Blind Flanges, Lap Joint Flanges, Slip On Flanges, Socket Weld Flanges, Threaded Flanges, Weld Neck Flanges
17-4PH Chemistry & Specifications
17-4PH Specifications: UNS S17400, AISI 630, ASTM A564-630, AMS 5604 Sheet, Strip and Plate, ASTM A 693 Plate, Werkstoff 1.4542
This specification covers bars and shapes (such as fasteners) of age hardened stainless steels such as 17-4PH. It includes hot-finished or cold-finished fasteners that are produced by hot rolling, extruding, or forging. Grade 630 shall be furnished in the solution-annealed or or age-hardened condition.
| 17-4PH | Fe | Cr | Ni | Cu | Mn | Si | Mo | Nb+Ta | C | P | S |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 15.0 | 3.0 | 3.0 | - | - | - | - | - | - | - |
| Max % | Bal | 17.5 | 5.0 | 5.0 | 1.0 | 1.0 | 0.50 | 0.45 | 0.07 | 0.04 | 0.03 |
| Aged Condition | Ultimate Tensile (min. ksi) | Yield Strength 0.2% Offset (min. ksi) | Elongation (min. %) | Hardness (Rockwell C, min.) |
|---|---|---|---|---|
| H900 | 190 | 170 | 10 | 40 |
| H925 | 175 | 155 | 10 | 38 |
| H1025 | 155 | 145 | 12 | 35 |
| H1075 | 145 | 125 | 13 | 32 |
| H1100 | 140 | 115 | 14 | 31 |
| H1150 | 135 | 105 | 16 | 28 |
| H1150-M | 115 | 75 | 18 | 24 |
| H1150-D | 125 | 105 | 16 | 24 / 33 max |
17-4PH Slip on Flange Features & Benefits

17-4 PH slip on flanges are similar to the socket weld flange but without the socket shoulder. When using a socket weld flange, the pipe rests against this internal shoulder. Since a slip on flange does not have shoulder, the pipe can slide completely through the flange hub and is free to spin.
Advantages
- Typically lower in price than weld-neck flange, yet welding costs can be more.
- There is a reduced need to cut the pipe length accurately, making it easier to install.
- The slip on flange is free to spin on the pipe for easy bolt alignment.
Disadvantages
- They require two fillet welds: one fillet weld at the hub of the flange and a second weld at the inside diameter of the flange near the flange face.
- Though they can be used for high temperature and pressure applications, they typically are not as other flange types give a more secure joint.


