Skip to main content
Extreme Bolt & Fastener
Quote

Tungsten Screws

Last updated

Ultra-high density & high temperature / strength stability

Need help choosing a material?

All Screws Basic
  • High strength at extreme high temperatures (vacuum)
  • Radiopaque to x-rays and other radiation
  • Very high density of 19.3 gm/cc
  • Excellent corrosion resistance
  • Mechanical properties of tungsten screws
  • Tungsten material datasheet

Tungsten screws are an ideal material for high temperature stability. Their extremely high melting point of 3420°C, makes tungsten fasteners useful for some of the hottest vacuum furnace environments. Another attribute of tungsten is its extreme high density. The high mass of tungsten screws make them radiopaque, allowing them to block radiation and show up well on x-rays – even better than lead. In addition, their high density also makes them ideal for balancing rotating parts. Beyond their high mass and temperature stability, tungsten fasteners are also very corrosion resistant.

Tungsten screws are usually made from tungsten alloys per ASTM B777, and range from 90% to 97% pure tungsten, alloyed with nickel and copper or nickel and iron. Fasteners can also be made from Commercially Pure (CP) Tungsten.

Applications

  • The heat treating / furnace industry uses tungsten screws in high temperature vacuum furnaces due to tungstens great high temperature strength & stability.
  • The oil & gas industry uses tungsten screws for radiation shielding properties to protect equipment used in oil and gas detection, as well as down hole logging for density and ability to withstand intense hydrostatic pressure
  • Tungsten screws also play a role in the medical community for their low magnetic properties as well as their radiopaque properties.
  • The aerospace industry depends on the tungsten screws for their combination of high density and mechanical strength which allows them to reduce the physical size of components, offering greater control of weight distribution for propellers, inertial systems and fluid control systems to name a few.

Tungsten Screw Types:  Button Head Cap Screws, Flat Head Screws, Hex Head Cap Screws, Pan Head, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws


Tungsten Chemistry & Specifications

Tungsten Specifications: ASTM B777, Mil Spec T-21014D

Tungsten Alloy ASTM-B777 — table
Tungsten Alloy
ASTM-B777
Class 1Class 2Class 3Class 4CP Tungsten
Material Composition90% W
6% Ni
4% Cu
92.5% W
5.25% Ni
2.25% Fe
95% W
3.5% Ni
1.5% Cu
97% W
2.1% Ni
0.9% Fe
99.95% W
Density17 gm/cc17.5 gm/cc18 gm/cc18.5 gm/cc19.3 gm/cc
Mil. Spec. T-21014 DClass 1Class 2Class 3Class 4-
TypeType II & IIIType II & IIIType II & IIIType II & III-
Hardness; Rockwell C24.026.027.028.031.0
Ultimate Tensile Strength; PSI94,000110,00094,000100,000142,000
Yield Strength, .2% Offset; PSI75,00075,00075,00075,000109,000
Elongation, % in 1”2+2+2+2+
Modulus of Elasticity; PSI40 x 10E647 x 10E645 x 10E653 x 10E658 x 10E6
Coefficient of Thermal Expansion x 10E-6/°C (20°-400°C)5.44.64.44.54.2
Electrical Conductivity; %IACS1413161718

Questions?

Our material experts are ready to help guide you through your specific application.