Skip to main content
Extreme Bolt & Fastener
Quote

Nitronic Washers

Last updated

General-purpose steel alloy for strength, temperature & wear

Need help choosing a material?

Nitronic Pixabay Free Oil Refinery

Nitronic is a high strength austenitic steel alloy that was designed for high temperature use. It offers good high temperature properties as well as good low-temperature impact resistance. In addition, Nitronic bolts also offer nearly double the yield strength of 300 series stainless steel. Nitronic fasteners are available in two alloy variations, Nitronic 50 and Nitronic 60, each offering different niche capabilities.

Nitronic 50: Corrosion Resistance & Strength
Nitronic 50 (1.3964; also known as N-50 and XM-19) fasteners offers reasonable corrosion resistance and a good combination of strength, ductility, and toughness, across a wide range of temperatures from extreme heat to cryogenic. Due to Nitronic 50 fasteners improved corrosion resistance compared to 316 and 317 stainless and good mechanical strength, they are often used in marine applications, pump shafts, petrochemical and pulp & paper applications. Perhaps their most unique characteristic is their low magnetic permeability.  This attribute allows Nitronic 50 screws to be used for medical implants.

Nitronic 50 Properties — table
Nitronic 50 Properties
Tensile strength100ksi
Yield Strength55ksi
Elongation35%
Hardness293
Usable Temperature1200°F

Nitronic 60: Wear & Oxidation Resistance
Nitronic 60 is known for its good resistance to wear, fretting, and galling even at elevated temperatures. Nitronic 60 bolts are typically chosen for these attributes as an economic alternative compared to high cost cobalt-bearing and nickel alloys. In terms of oxidation resistance, Nitronic 60 is comparable to that of 309 stainless steel. At high temperatures, Nitronic 60 bolts exhibit carburization resistance superior to both 316L and 309. General corrosion resistance of Nitronic 60 falls between that of 304 and 316SS. Nitronic 60 bolts are often used in chemical processing, bridges and infrastructure, and aerospace applications.

Nitronic 60 Properties — table
Nitronic 60 Properties
Tensile strength95ksi
Yield Strength50ksi
Elongation35%
Hardness241 (max)
Usable Temperature1800°F


Nitronic Fastener Styles

Nitronic Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View Nitronic Screws

Nitronic Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View Nitronic Bolts

Nitronic Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View Nitronic Nuts

Nitronic Threaded Products

Standards

  • DIN 975
  • DIN 976
View Nitronic Threaded Products

Nitronic Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View Nitronic Washers

Nitronic (1.3964) Chemistry & Specifications

Nitronic 50 Specifications: ASTM A479, UNS S20910, AMS 5848 (bar), W. Nr./EN: 1.3964

Nitronic 50 — table
Nitronic 50CrNiMnMoSiNNbVCPSFe
Min %20.511.54.01.5-0.20.10.1----
Max %23.513.56.03.01.00.40.30.30.060.040.01Bal

Nitronic 60 Specifications: ASTM A479, UNS S21800

Nitronic 60 — table
Nitronic 60CrNiMnSiMoNCPSFe
Min %16.08.07.03.5-0.08----
Max %18.09.09.04.50.750.180.10.060.03Bal

Nitronic Temperature vs. Wear Resistance

Nitronic 60 — temperature vs wear resistance (wear volume, mm³; log scale)


Nitronic Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
Nitronic 12 point screws offer improved torque over socket heads, but they are be less economical and require a higher minimum quantity due to production complexity. Nitronic 12 point screws are available in diameters 1/4" or larger.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
When a low profile fastener with wide clamping area is required, we recommend Nitronic button head cap screws. Button head screws are often used for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
Nitronic flat head screws have a standard 82° countersink angle, but can also be customerized to other angles from 60° -120°. Flat heads are designed to be flush with the surface and can be made with a slotted and socket drivers. Phillips, torx and tamperproof drivers are also available.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
Nitronic hex head cap screws are used for high clamping force and easy access. They have a washer face under the head that isn't part of a hex head bolt. This face provides tighter dimensional tolerances.
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Nitronic pan head screws have rounded heads and typically feature a slotted driver. They best serve low torque applications that require small diameter fasteners.
Security Screws
Nitronic security screws provide a solution to unwanted tampering because they cannot be removed with a standard driver. Nitronic tamper-proof screws can be made in a wide variety of driver styles, as well as custom per print.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
Nitronic set screws are a headless fastener. They have a slotted or socket driver on one end and a special point on the other. We offer Nitronic set screws in cup, cone, flat, dog and half-dog points.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
Nitronic socket head cap screws are a secure fastening solution when there is little clearance.
Vented Screws
Nitronic vented screw provide sensitive vacuum applications a way to outgas contaminents. They feature a hole that is bored from head through shaft for outgasing. Nitronic vented screws can be made with most any head style.

Nitronic Washers

Flat WashersASME 18.21.1SAE / USSDIN 125 / ISO 7089 / ISO 7090DIN 126 / ISO 7091
Nitronic washers are offered in SAE, DIN, USS, MilSpec, oversized, and custom sizes.
Lock WashersASME B18.21.1DIN 127 / ISO 7090DIN 6796 / ISO 10690
Nitronic lock washers are made in the split lock washer style.

Questions?

Our material experts are ready to help guide you through your specific application.