Nimonic Washers
Last updated
Excellent high temperature creep resistance to 1500°F
Need help choosing a material?
Good high temperature corrosion and oxidation resistance
- Excellent for high strength & high pressure applications
- Nimonic 75 and Nimonic 80A chemistry & specifications
- Rupture strength and mechanical strength charts
- Nimonic datasheet
Nimonic fasteners are best known for their high temperature, low-creep attributes. They are comprised primarily of nickel and chromium – typically more than 50% nickel and 20% chromium – along with other additive such as titanium and aluminum. Due to their ability to withstand extreme temperatures and pressure, they are often used in aircraft parts and gas turbine exhaust applications as well as high temperature furnace applications. Nimonic fasteners are available in two different alloy grades with slightly different capabilities.
Nimonic 75
Nimonic 75 fasteners have good mechanical properties and oxidation resistance at high temperatures to 1200°F (650°C). Comparable to Inconel 600, Nimonic 75 bolts are primarily used when oxidation and scaling resistance are required in high temperature conditions.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength (annealed) | 750 Mpa | 109 ksi |
| Yield Strength (annealed) | 275 Mpa | 39 ksi |
| Elongation at Break | 42% | 42% |
Nimonic 80A
Nimonic 80A fasteners are similar in composition to Nimoic 75 but are age hardened to offer much higher strengths. Nimonic 80A bolts offer a good combination of corrosion and oxidation resistance, while maintaining high levels for strength to temperatures as high as 1500°F (815°C).
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength (age hardened) | 1250 Mpa | 181 ksi |
| Yield Strength (age hardened) | 780 Mpa | 113 ksi |
| Elongation at Break | 30% | 30% |
Nimonic Fastener Styles
Nimonic Screws
- 12 Point Screws
- Button Head Cap Screws
- Flat Head Screws
- Hex Head Cap Screws
- Pan Head Screws
- Security Screws
- Set Screws
- Socket Head Cap Screws
- Vented Screws
Standards
- DIN 603 / ISO 8677
- DIN 912 / ISO 4762
- DIN 913 / ISO 4026
- DIN 914 / ISO 4027
- DIN 915 / ISO 4028
- DIN 916 / ISO 4029
- DIN 921
- DIN 931 / ISO 4014
- DIN 933 / ISO 4017
- DIN 961 / ISO 8676
- DIN 965 / ISO 7046
- DIN 966 / ISO 7047
- DIN 7991 / ISO 10642
- DIN 7380 / ISO 7380
- DIN 84 / ISO 1207
- DIN 85 / ISO 1580
- DIN 34822
- DIN 34821
- DIN 7504 / ISO 15480
- DIN 7984
- DIN 963 / ISO 2009
Nimonic Nuts
Standards
- DIN 439 / ISO 4035
- DIN 934 / ISO 4032
- DIN 985 / ISO 7040
- DIN 986
- DIN 980 / ISO 7042 / ISO 19513
- DIN 6923 / ISO 4161
Nimonic Washers
Standards
- DIN 125 / ISO 7089 / ISO 7090
- DIN 126 / ISO 7091
- DIN 127 / ISO 7090
- DIN 9021 / ISO 7093
Nimonic Chemistry & Specifications
Nimonic 75 Specifications: UNS N06075, Werkstoff 2.4951 &. 2.4630, DIN NiCr20Ti
| Nimonic 75 | Ni | Cr | Fe | Si | Mn | Ti | Cu | C |
|---|---|---|---|---|---|---|---|---|
| Min % | - | 18.0 | - | - | - | 0.2 | - | 0.08 |
| Max % | Bal | 21.0 | 5.0 | 1.0 | 1.0 | 0.6 | 0.5 | 0.15 |
Nimonic 80A Specifications: UNS N07080, Werkstoff 2.4952 & 2.4631
| Nimonic 80A | Ni | Cr | Fe | Ti | Co | Al | Mn | Si | Cu | Zr | C | S | B | Pb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min % | - | 18.0 | - | 1.8 | - | 1.0 | - | - | - | - | - | - | - | - |
| Max % | Bal | 21.0 | 3.0 | 2.7 | 2.0 | 1.8 | 1.0 | 1.0 | 0.2 | 0.15 | 0.10 | 0.015 | 0.008 | 0.0025 |
| Rupture Strength (1000 h) | ksi | MPa |
|---|---|---|
| 1400°F / 760°C | 6.0 | 40 |
| 1500°F / 815°C | 3.5 | 24 |
| 1600°F / 870°C | 2.2 | 15 |
| 1700°F / 925°C | 1.5 | 10 |
| 1800°F / 980°C | 1.2 | 8 |
Nimonic 80A Precipitation Hardened Rupture Strength
| Rupture Strength (1000 h) | ksi | MPa |
|---|---|---|
| 1400˚F / 760˚C | 6.0 | 40 |
| 1500˚F / 815˚C | 3.5 | 24 |
| 1600˚F / 870˚C | 2.2 | 15 |
| 1700˚F / 925˚C | 1.5 | 10 |
| 1800˚F / 980˚C | 1.2 | 8 |





















