Skip to main content
Extreme Bolt & Fastener
Quote

Alloy 926 Nuts

Last updated

A corrosion resistant 6Mo alloy similar to AL6XN and SMO254

Need help choosing a material?

Extra Pixabay Free Corroded Nuts and Bolts
  • Higher corrosion resistant substitute for 316L
  • Corrosion resistance comparable to Super Duplex 2507
  • Similar chemistry to AL6XN and SMO 254
  • Chemistry and specifications of Alloy 926

Alloy 926 (1.4529) screws are the perfect substitute for 316L when higher corrosion resistance is required without additional strength. Alloy 926 fasteners are considered a 6-Moly alloy (6 Mo or 6% Molybdenum) like sister alloys AL6XN and SMO 254. Within the class of stainless steels, these 6 Mo alloys are considered to be very corrosion resistant. Bolts made from Alloy 926 are a super-austenitic molybdenum stainless steel offering corrosion resistance comparable to Super Duplex 2507 but with slightly lower strength and cost. Almost identical in chemistry to 6 Moly alloys AL6XN and SMO 254, Alloy 926 is often chosen for paper plants, desalination and weak acid environements.

In addition, Alloy 926 fasteners are also similar in composition to 904L, but with increased nitrogen and molybdenum providing Alloy 926 bolts improved general corrosion resistance as well as resistance to pitting and crevice corrosion. Because of Alloy 926 resistance to chloride stress corrosion cracking, it makes 926 fasteners ideal for use in desalination, and pulp and paper plants. This alloy is also good option for diluted sulfuric and phosphorus acid applications.

Mechnical Properties

  • Tensile Strength: 94 ksi
  • Yield Strength: 43 ksi
  • Elongation: 35%
  • Rockwell B Hardness: 86
  • Density: 0.29 lb/in³
  • Temperature Limits: 750ºF / 400ºC


Alloy 926 Fastener Styles

Alloy 926 Screws

Standards

  • DIN 603 / ISO 8677
  • DIN 912 / ISO 4762
  • DIN 913 / ISO 4026
  • DIN 914 / ISO 4027
  • DIN 915 / ISO 4028
  • DIN 916 / ISO 4029
  • DIN 921
  • DIN 931 / ISO 4014
  • DIN 933 / ISO 4017
  • DIN 961 / ISO 8676
  • DIN 965 / ISO 7046
  • DIN 966 / ISO 7047
  • DIN 7991 / ISO 10642
  • DIN 7380 / ISO 7380
  • DIN 84 / ISO 1207
  • DIN 85 / ISO 1580
  • DIN 34822
  • DIN 34821
  • DIN 7504 / ISO 15480
  • DIN 7984
  • DIN 963 / ISO 2009
View Alloy 926 Screws

Alloy 926 Bolts

Standards

  • DIN 931
  • DIN 933
  • ISO 4014
  • ISO 4017
  • ISO 7370
View Alloy 926 Bolts

Alloy 926 Nuts

Standards

  • DIN 439 / ISO 4035
  • DIN 934 / ISO 4032
  • DIN 985 / ISO 7040
  • DIN 986
  • DIN 980 / ISO 7042 / ISO 19513
  • DIN 6923 / ISO 4161
View Alloy 926 Nuts

Alloy 926 Threaded Products

Standards

  • DIN 975
  • DIN 976
View Alloy 926 Threaded Products

Alloy 926 Washers

Standards

  • DIN 125 / ISO 7089 / ISO 7090
  • DIN 126 / ISO 7091
  • DIN 127 / ISO 7090
  • DIN 9021 / ISO 7093
View Alloy 926 Washers

Alloy 926 (1.4529) Chemistry & Specifications

Alloy 926 (1.4529) Chemistry

Alloy 926 — table
Alloy
926
FeNiCrMoMnCuSiNPCS
Min %-24.0019.006.00-0.50-0.15---
Max %Bal26.0021.007.002.001.500.500.250.030.0200.01

Alloy 926 Screws

12 Point ScrewsIFI-115MIL SPECDIN 34822DIN 34821
Alloy 926 12 point screws are typically used for applications when higher torque than socket head cap screws is required. We offer 12 points in 1/4" diameter or larger. The only drawback is Alloy 926 12 point screws are less economical and require a high minimum quantity due to the complexity of production.
Button Head Cap ScrewsASME B18.3ASME 18.3.4MDIN 7380 / ISO 7380
When a wide clamping area and low profile fastener is needed, Alloy 926 button head cap screws are an ideal choice. Button head screws are also used for fastening a material that is too thin to counter bore.
Flat Head ScrewsASME B18.3ASME B18.3.6DIN 963 / ISO 2009DIN 965 / ISO 7046DIN 7991 / ISO 10642
Alloy 926 flat head screws have a standard 82° countersink angle, typically with a slotted or socket driver. Flat heads are also available with angles ranging from 60° -120° upon request. Phillips, torx and tamperproof drivers are also available depending on size, quantity and material.
Hex Head Cap ScrewsASME B18.6.3DIN 931 / ISO 4014DIN 933 / ISO 4017DIN 961 / ISO 8676
Perhaps the most common fastener are Alloy 926 hex head cap screws. These feature an added washer face providing tighter dimensional tolerances over a hex bolt which lacks this element. Alloy 926 hex head cap screws provide high clamping force and easy access.
Pan Head ScrewsASME B18.6.3DIN 7985DIN 921DIN 85 / ISO 1580DIN 84 / ISO 1207 (cheese head)DIN 966 / ISO 7047 (raised counter sunk)
Alloy 926 pan head screws have a rounded head and are best for small diameter and low torque application. They typically feature a slotted driver.
Security Screws
When unwanted removal or tampering is critcal, Alloy 926 security screws provide protection because they cannot be unfastened using an common driver. Tamper-proof screws are produced in a wide variety of head styles, as well as custom per print.
Set ScrewsASME B18.3DIN 913 / ISO 4026DIN 914 / ISO 4027DIN 915 / ISO 4028DIN 916 / ISO 4029
Alloy 926 set screws are a headless fastener that have a slotted or socket driver and a unique point end. Set screws are available with cup, cone, flat, dog and half-dog points.
Socket Head Cap ScrewsASME B18.3DIN 912 / ISO 4762DIN 7984
For safe, secure fastening in low clearance applications, Alloy 926 socket head cap screws are often the fastener of choice.
Vented Screws
Alloy 926 vented screws provide a way to out-gas application contaminents through a vertical hole drilled from the screw head through the threaded shaft. Vented screws are ideal for vacuums / high vacuums. Nimonic vented screws are available a variety of head styles.

Questions?

Our material experts are ready to help guide you through your specific application.