Skip to main content
Extreme Bolt & Fastener
Quote

AL6XN Weld Neck Flanges

Last updated

A mid-ranged corrosion resistant 6Mo alloy with good strength

Need help choosing a material?

weld neck flange solo

Originally developed to combat sea water corrosion, AL6XN has expanded its role as being good mid-range corrosion resistant alloy. AL6XN weld neck flanges are a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. Also considered a 6Moly alloy, AL6XN flanges are similar in chemistry and capabilities to Alloy 926 and SMO 254. With a higher nickel and molybdenum content than Duplex 2205 and Super Duplex 2507, it delivers better corrosion resistance while giving a more cost effective alternative to nickel super alloys like Inconel or Hastelloy in moderately corrosive conditions.

Corrosion Resistance

  • Moderate general corrosion resistance
  • Excellent chloride / salt water protection
  • Good performance in phosphoric acid
  • Moderate resistance to nitric acid

AL6XN corrosion resistance compared on a GOOD-to-EXCELLENT spectrum against 316SS, Duplex 2507, and Hastelloy C276

Chemical Resistance

In chemical processes which utilize chlorides, such as paper mills and waste water, stress corrosion cracking (SCC) is a common culprit for 316L stainless failures. Duplex alloys will outlast environments that will cause SCC in 316 stainless, but for more severe low PH environments, weld neck flanges made from higher nickel content alloys like AL6XN will generally work better. For the most extreme situations, alloys with >45% nickel content like Hastelloy are often considered.

Outstanding Resistance to Salt Water

Seawater is where AL6XN weld neck flanges outperform so many alloys providing protection to stress corrosion cracking, pitting and crevice corrosion in a broad range of marine applications. AL6XN weld neck flanges contain a minimum of 6% molybdenum content and it is this addition of molybdenum that provides the greatest protection against pitting and crevice corrosion.

Mechanical Properties

Electrical Resistivity: 535 Ohm-circ mil/ft
Ultimate Tensile Strength: 108 ksi
0.2% Yield Strength: 53 ksi
Density: 0.291 lb/in 3

AL-6XN strength comparison: typical ultimate tensile strength (ksi) of AL6XN vs Monel 400, Duplex 2205, Hastelloy C276, Inconel 625, and Inconel 718, arranged good-to-excellent.

Chemistry

  • High molybdenum content provides enhanced corrosion protection in chloride environments.
  • Carbon helps to prevent sensitization during welding
  • Chromium enhances pitting and crevice corrosion resistance
  • The interstitial strengthening effect of nitrogen gives AL6XN weld neck flanges good high strength properties

AL6XN Applications

  • Desalination plants depend on AL6XN weld neck flanges for the salt water corrosion protection
  • Pulp bleaching equipment and piping 
  • The power industry uses AL6XN weld neck flanges where salt water and chlorides are present such as steam surface condensers, supercritical, high pressure, feed water heaters, steam surface condensers, flue-gas desulfurization equipment and in nuclear power water piping 
  • Offshore 
  • Chemical Processing - processing tanks, vessels and pipes as well as plate and frame heat exchangers.

Flange Types Available: Blind Flanges, Lap Joint Flanges, Slip On Flanges, Socket Weld Flanges, Threaded Flanges, Weld Neck Flanges


AL6XN Chemical Composition & Specifications

AL6XN Specifications: ASTM A479, UNS NO8367, ASTM A 240, ASTM B 688, ASME SA-240, ASME SB-688, ASTM B690, ASTM B691, ASTM A240, ASTM B688, ASME SA-240, ASME SB-688

AL6XN — table
AL6XNFeNiCrMoMnSiCuNPCS
Min %-23.520.06.0---0.18---
Max %Bal25.522.07.02.01.00.750.250.0400.030.030

 AL6XN Mechanical Data

AL6XN Tensile Data
Temperature
(°F)
Ultimate
Tensile (ksi)
Yield Strength
0.2% Offset
(ksi)
Elongation
%
-45021814236
-32019610749
Room Temp.1085347
2001004947
400904046
600863647
800873648
1000843450

Corrosion Curves for AL6XN

AL-6XN alloy iso-corrosion curve in hydrochloric acid: the 4 mpy (0.1 mm/y) corrosion-rate contour for AL-6XN Alloy compared with Alloy 904L, plotted as temperature vs HCl concentration.

AL-6XN sulfuric acid ISO corrosion curve: 4 mpy (0.1 mm/y) corrosion-rate contours for AL-6XN alloy, Alloy 904L and Type 316 stainless, plotted as temperature vs. sulfuric acid concentration.

AL-6XN alloy — 5 mpy (1.3 mm/y) iso-corrosion resistance in phosphoric acid, compared with Alloy G and Alloy 276

AL-6XN CORROSION RESISTANCE IN BOILING SOLUTIONSCorrosion Rate in mils/year (line 1) and mm/year (line 2)
MediaTYPE 316LTYPE 317LALLOY 904LAL-6XNALLOY 276
20% Acetic Acid0.120.480.590.120.48
-0.003-0.01-0.02-0.003-0.01
45% Formic Acid23.4118.377.682.402.76
-0.6-0.47-0.2-0.06-0.07
10% Oxalic Acid44.948.0327.137.3211.24
-1.23-1.14-0.69-0.19-0.28
20% Phosphoric Acid0.600.720.470.240.36
-0.02-0.02-0.01-0.006-0.009
10% Sodium Bisulfate71.5755.768.884.562.64
-1.82-1.42-0.23-0.12-0.067
50% Sodium Hydroxide77.6932.789.6111.417.77
-1.92-0.83-0.24-0.29-0.45
10% Sulfamic Acid124.393.269.139.362.64
-3.16-2.39-0.23-0.24-0.067
10% Sulfuric Acid635.7298.3100.871.913.93
-16.15-7.58-2.53-1.83-0.35
Testing per ASTM G-31

AL6XN Weld Neck Flange Features & BenefitsWeld Neck Flange2

AL6XN weld neck flanges are best for hazardous, high pressure applications. Weld neck flanges are easily identified by their long tapered neck. The inside of the flange is bored to match the inside diameter of the pipe in order to ensure there is no restriction in flow and also to prevent turbulence at the joint. The tapered neck provides thicker metal at the flange joint, while the neck narrows down gradually to meet the pipe where it is butt welded to the pipe. This design helps to transfer stress from the flange to the pipe, as well as diminish stress concentration at the base of the flange connection.

AL6XN weld neck flanges are ideal for critical applications involving high pressure, sub-zero and elevated temperatures, as well as in conditions where fluctuations cause pipe expansion/contraction.

Key Feature: Ideal for high presure applications.

Weld Neck Flange Advantages

  • Ability to withstand high pressure – since pipe is welded to the neck of the flange, stress is transferred to the pipe.
  • The beveled end that, when connected to a pipe, creates a trough for a strong weld.
  • Most versatile flange in the ASME stable of flanges.

Weld Neck Flange Disadvantages

  • More advanced welding skill is needed for installation. The inside weld must be smooth to reduce friction and the outside weld must meet code criteria.

Uses

  • Severe conditions that include high-pressure, high-cyclic and hazardous fluid applications.
  • Fitting-to-fitting fabrication where the flange is welded directly to a fitting, such as an elbow, without the need for a short piece of pipe, as would be required with a slip-on flange.

Questions?

Our material experts are ready to help guide you through your specific application.