Skip to main content
Extreme Bolt & Fastener
Quote

17-4 PH Button Head Cap Screws

Last updated

An extremely strong precipitation hardened stainless steel

Need help choosing a material?

Button Head

17-4 PH button head cap screws are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 stainless steel, 17-4 PH screws yield strength is up over 4 times greater. When compared to Duplex 2205 screws, the yield strength of 17-4 PH can be up to 2-½ times greater.

17-4 button head cap screws are available in 8 different aged (precipitation hardened) conditions offering a variety of mechanical properties (see below). 

17-4 PH Screw Types: 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Cap Screws, Pan Head Screws, Set Screws, Socket Head Cap Screws, Tamper Resistant Security Screws, Vented Screws


17-4PH Button Head Cap Screw Features & Benefits

17-4PH button head cap screws combine the similar shape of a pan head with the driver of a socket head. The socket driver is ideal for low clearance applications that require a large area clamping face. Compared to a standard socket head cap screw, 17-4PH button heads have a lower and wider profile. This can be useful when the clamping material is too thin to counter-bore.

Advantages

  • Wide bearing surface for clamping
  • Low profile head

17-4PH Chemistry & Specifications

17-4PH Specifications: UNS S17400, AISI 630, ASTM A564-630, Werkstoff 1.4542, AMS 5604 Sheet, Strip and Plate, ASTM A 693 Plate

17-4PH chemical composition, Min % and Max %
17-4PHFeCrNiCuMnSiMoNb+TaCPS
Min %-15.03.03.0-------
Max %Bal17.55.05.01.01.00.500.450.070.040.03

ASTM F593, Grade 630

This specification covers seven groups of stainless steel alloys, with ASTM F593, Grade 630 applying 17-4PH. ASTM F593 Grade 630 covers the requirements for 17-4PH stainless steel bolts, hex cap screws, and studs sized 0.25 to 1.50 inches, inclusive, in nominal diameter. It is intended for common use and for service applications requiring general corrosion resistance.

ASTM F593 mechanical requirements for 17-4PH, Grade 630
Full-Size TestsMachined Specimen Tests
Stainless
Steel Alloy
Group
ConditionAlloy
Mechanical
Property
Marking
Nominal
Diameter
(inches)
Tensile
Strength
(ksi)
Yield
Strength
(ksi)
Rockwell
Hardness
Tensile
Strength
(ksi)
Yield
Strength
(ksi)
Elongation
%
7 (630)AHF593U1/4 to 1.5, incl135 to 170105C28 to 3813510516

Common 17-4 Fastener Conditions:  Aged Conditions vs Tensile Strength

ASTM A564 GR 630

This specification covers bars and shapes (such as fasteners) of age hardened stainless steels such as 17-4PH. It includes hot-finished or cold-finished fasteners that are produced by hot rolling, extruding, or forging. Grade 630 shall be furnished in the solution-annealed or or age-hardened condition.

17-4 PH - Tensile Data vs Aged Condition
Aged ConditionUltimate Tensile
(min. ksi)
Yield Strength
0.2% Offset
(min. ksi)
Elongation
(min. %)
Hardness
(Rockwell C, min.)
H9001901701040
H9251751551038
H10251551451235
H10751451251332
H11001401151431
H11501351051628
H1150-M115751824
H1150-D1251051624 / 33 max

Questions?

Our material experts are ready to help guide you through your specific application.