Skip to main content
Extreme Bolt & Fastener
Quote

Specialty Stainless Steel

Last updated

Improved capabilities over 300 series stainless

Need help choosing a material?

specialty stainless page 11 12 2026 small

Specialty stainless fasteners provide industry with temperature stability, strength and corrosion improvements over typical 300 series steels.

Strength

17-4 PH

17-PH fasteners offer excellent high strength and hardness. They are available in the annealed condition or with a variety of age hardening heat treatments that provide different levels of strength ranging from 160-210 ksi UTS.

Duplex Steel

Offering a higher yield strength than 300 series stainless, Duplex fasteners not only offer high strength but also chloride corrosion resistance. They are best in terms of localized chloride corrosion including pitting and crevice corrosion as well as stress corrosion cracking. Available in two grades Duplex 2205 and Super Duplex 2507 which offers slightly higher strength – twice that of 316 stainless.

High Temperature

Alloy 330

Designed for use in furnace applications, Alloy 330 bolts offer excellent oxidation and carburization resistance at extreme temperatures. Their most prized attribute is their ability to perform under cyclic temperature conditions: from high heat to cooling.

310 Stainless

Similar to Alloy 330, 310 stainless is often used in elevated temperature situations where slightly less strength and heat resistance are required. 310 stainless bolts can be used in moderately carburizing, oxidizing, nitriding, and thermal cycling applications.

A286 / Alloy 660

Though A286 bolts don’t offer quite the heat resistance as 330 or 310, they do offer much higher strength with a minimum ultimate tensile strength up to 160ksi in certain grades. A286 fasteners are typically used for high temperature applications that require both oxidation and creep resistance, as well as superior strength.

High TemperatureSpecialty Stainless Steel
MaterialsUsable
Temp Limit
(°F)
Usable
Temp Limit
(°C)
Alloy 33021001148
310 SS20001090
A-2861300700

Corrosion Resistance

AL6XN

AL6XN bolts were originally developed to combat saltwater corrosion. With higher nickel content than Duplex, they also offer moderate general corrosion resistance, but not to the level of a nickel alloy.

Alloy 20

Suited for moderately corrosive applications, Alloy 20 bolts are best known for their resistance to hot sulfuric acid – specifically to stress corrosion cracking in 20%-40% boiling acid. Alloy 20 fasteners also provide decent stress corrosion cracking, pitting and crevice corrosion resistance in chloride.

Specialty Stainless Steel - Frequently Asked Questions

Answers from our engineers, drawn from the Specialty Stainless Steel technical questions we're asked most.

Specialty Stainless Steel Fasteners: A286, Super Dupex & 17-4PH

While there are many grades of stainless steel available for fasteners, we will focus on three of the highest performing grades used: Super Duplex, A286 and 17-4PH.When comparing these materials to 316 stainless steel, their properties – of corrosion resistance, strength and high temperature stability – are significantly improved.

Corrosion Resistance

The term “corrosion resistance” is a very much a relative term as it is dependent on the application’s corrosive media, temperature and concentrations. In comparison to 316 stainless steel fasteners, one most corrosion resistant stainless steel grades to be aware of is super duplex stainless steel or alloy 2507. Due to its higher content of chromium, nitrogen and molybdenum, super duplex stainless steel fasteners offer reliable resistance to localized and uniform corrosion.

Key Characteristics:

Good resistance to uniform corrosion

Good resistance to pitting and crevice corrosion

Good resistance to stress corrosion cracking and corrosion fatigue

Applications Examples:

Pulp & paper equipment

Desalination plants

Chemical process equipment

However, if super duplex does not satisfy your needs, there are a variety of other specialty alloys that will provide you greater corrosion resistant horsepower. To learn more about other corrosion resistant fasteners, see our Extreme Bolt & Fasteners, “Corrosion Resistant Material Guides” for more information on our specialty alloys, engineered polymers and advanced ceramic fasteners.

High Temperature Stability

At elevated temperatures, 316 stainless steel fasteners will oxidize relatively quickly in air and mechanically weaken. One of the best stainless steel alloys to counter these effects is alloy A286. This iron-nickel-chromium alloy (once age-hardened) provides A286 fasteners with high levels of strength from room temperature up to about 1300°F (700°C).

Key Characteristics:

Good high temperature oxidation resistance

Excellent strength, even at elevated temperatures

Application Examples:

High temperature exhaust streams

Turbines

Manifolds and flue gas streams

![Strength of high performance materials compared](

High Strength

Compared to 316 stainless steel, all the specialty stainless alloys provide significantly improved strength, with super duplex being about 2x stronger and A286 being about 2.5x stronger. However, 17-4PH, a specialty grade of stainless steel surpasses them all. Fasteners made from 17-4PH can have a yield strength that is up to 4.5x strong than 316 fasteners.

17-4PH is a precipitation hardened alloy with 8 different methods of heat treating. Depending on the heat treatment desired the yield strength could range from 2 – 4.5x that of 316 stainless steel. This chart shows the different heat treatments available and their respective strengths (click chart for more details).![17-4PH Tensile Data vs Aged Condition](

Key Characteristics:

Superior strength

Maintains good mechanical properties up to 600°F

Application Examples:

High torque applications

High pressure valves and process equipment

What our customers say

More customer feedback
“I purchased from you specifically because of Jon’s expertise and professionalism.”
“Very impressed; good prices and delivered earlier than lead time given, which was a real bonus.”
“Extreme Bolt is definitely on my go-to list.”

Questions?

Our material experts are ready to help guide you through your specific application.