Skip to main content
Extreme Bolt & Fastener
Quote

Monel 400 Flanges

Last updated

Monel 400 flanges for seawater and reducing media

Need help choosing a material?

Monel Pixabay Free Submarine

A nickel-copper alloy, Monel 400 flanges are a solid solution nickel alloy that can only be hardened by cold working. Best known for its corrosion resistance to reducing media and seawater, Monel 400 is also tougher in oxidizing environments than copper alloys. Also known as alloy 400, Monel 400 flanges are also utilized in high temperature, caustic and salt solution applications.

High and Low Temperature Properties

Used for high temperature applications up to 1000°F in oxidizing atmospheres, Monel 400 flanges can also be used at higher temperatures if in a reducing environment. Though commonly used at high temperatures, Monel 400 flanges also retain their mechanical properties at subzero temperatures. Increased hardness at freezing temperatures has been shown to only slightly impair the ductility or impact resistance of Monel 400 flanges. Even when cooled to the temperature of liquid hydrogen, Monel 400 does not undergo a ductile-to-brittle transition which can cause fractures. This is especially unique compared to most ferrous materials which are often stronger, yet very brittle at extreme low temperatures.

Renowned Seawater Resistance

Perhaps the best attribute of Monel 400 flanges is their ability to defy seawater corrosion. Uniquely, they offer resistance to rapidly moving seawater, which can erode other materials, though stagnant salt water situations can sometimes result in crevice and pitting corrosion. In addition, Monel 400 flanges prevent stress corrosion cracking and pitting in most fresh and industrial waters.

General Corrosion Protection

Though it is best known for its resistance to sea water, Monel 400 flanges also show good resistance reducing media. It also resists oxidizing media better than many alloys with higher copper content. When it comes to acids, Monel 400 flanges offer very good protection from hydrofluoric acid in all concentrations up to the boiling point, as well as decent protection to sulfuric and hydrochloric acids under reducing conditions.

Monel 400 Fasteners & Flanges in Action: Extreme Applications

  • Saltwater resistance makes it critical to maritime components.
  • Chemical processing industries often choose Monel 400 flanges for equipment, process vessels, boilers and heaters.
  • Offshore oil and gas drilling utilize Monel 400 flanges for seawater corrosion protection.

Flange Types Available: Blind Flanges, Lap Joint Flanges, Slip On Flanges, Socket Weld Flanges, Threaded Flanges, Weld Neck Flanges

Monel 400 Chemistry and Specifications

Monel 400 (alloy 400), UNS N04400 (QQ-N-281), is a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalies. Monel 400 is commonly in marine engineering, chemical and hydrocarbon processing applications.

Monel 400 Specifications: BS3075NA13 (Wire), BS3076NA13 (Bar), ASTM B 164 (Rod, Bar, and Wire), ASTM B 564 (Forgings), ASME SB 164 (Rod, Bar, and Wire), ASME SB 564 (Forgings), AECMA PrEN 2305 (Wire for Rivets), SAE AMS 4675 (Bars and Forgings), SAE AMS 4730 (Wire), SAE AMS 4731 (Wire and Ribbon), DIN 17752 (Rod and Bar), DIN 17753 (Wire), DIN 17754 (Forgings), VdTÜV 263 (Sheet, Plate, Bar, and Tubing), QQ-N-281 (Plate, Sheet, Strip, Bar, Rod, Wire, and Forgings), Werkstoff 2.4360

Monel 400 — table
Monel 400Ni+CoCuFeMnSiCS
Min %6328.0-----
Max %-34.002.502.000.500.300.024

 


 Mechanical Properties of Monel Alloy 400

Monel 400 elevated-temperature tensile properties: tensile strength, 0.2% offset yield strength, and elongation vs. temperature.

         

Monel K500 — Mechanical Properties
Monel K500Ultimate Tensile StrengthYield Strength at 0.2%Elongation %Usable Temperature Limit
Value160 ksi110 ksi451100°F / 593°C
MONEL 400 - Tensile Data
Temperature
(°F)
Ultimate Tensile
(ksi)
Yield Strength
0.2% Offset
(ksi)
Elongation
%
Room Temp.833245
200793043
400772742
600802746
800682648
1000542440
MONEL K500 - Tensile Data
Temperature
(°F)
Ultimate Tensile
(ksi)
Yield Strength
0.2% Offset
(ksi)
Elongation
%
Room Temp.16011045
20015010847
40014710548
60014210349
80012510219
100095908
PRESSURE – TEMPERATURE RATINGS FOR MONEL 400
Nominal DesignationForgingsCastingsPlates
67Ni 30CuB564 Gr. N04400 (1)...B127 Gr. N04400 (1)
Working Pressures by Classes, psig
Temp., F15030040060090015002500
20 to 1002306008001200180030005000
2002005257001050157526304380
300190490655980147024504080
400180475630945142023653940
500170475630945142023653940
600140475630945142023653940
650125475630945142023653940
700110470625940141023503920
75095465620930139523303880
80080460610915137522903820
85065375505755113018853145
9005027536555082513702285

Monel 400 Corrosion Data

Monel 400 vs nickel alloys — resistance to hydrofluoric acid (20 mil/yr isocorrosion limit, temperature vs HF concentration)

Iso-corrosion diagram for Monel 400 in hydrofluoric acid (HF), showing temperature vs. acid concentration with corrosion-rate contour boundaries for air-free and aerated conditions, plus the atmospheric boiling-point curve.

Werkstoff 2.4360

Questions?

Our material experts are ready to help guide you through your specific application.