PEEK Screws for Non-Conductive High Impact Application

Q: Looking to change to a non-conductive material for use in a high
impact application. Would Alumina or Zirconia ceramic fasteners be a good fit?

A: We could certainly quote you some ceramic hardware, however ceramics may not be the best non-conductive choice for a high impact environment.  Ceramic fasteners are generally strong but brittle. This makes them susceptible to failure from impacts.

Depending on the temperatures in your application, you might want to consider a polymer like PEEK screws.  Glass fiber re-inforced PEEK screws offer nearly double the strength of natural PEEK.  A polymer fastener like PEEK will be much tougher than ceramics and will still offer non-conductivity. In addition, PEEK is a VERY stable polymer and is creep resistant, depending on the temperature you are operating at.

This entry was posted in Application, FAQs, High Strength, Non-Conductive, Technical Questions and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert