The optimal balance of chemical, mechanical and thermal propertiesThreaded flange Revised

PEEK threaded flanges (chemically known as Polyetheretherketone) offer a unique combination of properties for some of the most extreme applications. PEEK is classified as semicrystalline thermoplastic and high purity polymer, offering excellent mechanical strength and chemical resistance at high temperatures. PEEK threaded flanges offer a high strength alternative to PTFE fluoropolymers.

Key Benefits

  • Excellent resistance to thermal degradation (chemical decomposition caused by heat).
  • Chemically resistance to many oils, alcohols, solvents, and organics as well as harsh acids and bases in low concentrations and temperatures.
  • Hydrolysis resistance provides PEEK ability to retain all physical properties when continuously exposed to water or steam at high temperatures and pressures, as well as offer very low moisture absorption.
  • Outstanding creep resistance allows PEEK flanges to sustain large stresses over long service life.
  • Ability to withstand frequent sterilization processes.
  • V-0 flammability rating with low smoke and toxic gas emission when exposed to flame.
  • Good wear and abrasion resistance.
  • Electrical properties are maintained over a wide frequency and temperature range.
  • Radiation resistance allows PEEK to be used in or be repeatedly sterilized by, high doses of ionizing radiation.

Options for High Strength
Depending on the application, PEEK threaded flanges can be reinforced with glass or carbon fibers for improved strength and stiffness properties. Reinforced PEEK threaded flanges offer greater mechanical robustness especially in applications beyond 350°F (175°C).

Applications

  • Viewed by the medical community as an advanced biomaterial, PEEK threaded flanges are used in medical implants and are compatible with a high-resolution magnetic resonance imaging (MRI).
  • PEEK flanges are one of the few plastics compatible with ultra-high vacuum (UHV) which is necessary for many analytic techniques and particle accelerators.
  • Chemical processing and pharmaceutical applications depend on PEEK for it’s chemical resistance, high purity and ability to withstand sterilization processes.
  • PEEK threaded flanges are used in many electronics from cell phones to circuit boards for their lightweight strength and reduced noise, vibration and harshness (NVH).

Flanges made from customer specified PEEK grades are available upon request. 

ResouresFlange DimensionsFlange Bolting Chart

Flange Types Available: Blind FlangesThreaded Flanges


Common PEEK Threadd Flange Grades

PEEK 100% / Unfilled

PEEK, with no fillers is unreinforced and 100% polymer. Even without glass or carbon fiber reinforcement, this one of the strongest polymers we offer and well suited for a variety of applications including FDA food contact and other applications requireing high purity. 

PEEK Glass Fiber Reinforced

PEEK 30% Glass Fiber Reinforced provide the same chemical resistance and natural PEEK but nearly doubles in tensile strength.

PEEK Carbon Fiber Reinforced 

PEEK 20% Carbon Fiber Reinforced provides approximately 2.5 times the strength of pure PEEK. 

PEEK Extreme

PEEK Extreme is our proprietary receipe for the highest strength PEEK utilizing carbon fiber reinforcement. This version of PEEK over 3 times stronger than standard unreinforced PEEK. 

 


 Mechanical Properties of PEEK

PEEK Tensile Curves  Tensil Temperature Chart 11 2017

Chemical Resistance of PEEK / Victrex® Bolts

PEEK Chemical Resistance


PEEK Properties

PEEK Properties


PEEK Threaded Flange Features & Benefits

combined threaded flange image

PEEK threaded flanges have a tapered female thread to join the male threads of a pipe in order to create a tight seal. This type of flange is most ideal when post weld heat treatment is not possible in hazardous, flammable or explosive applications where welding is too dangerous. PEEK threaded flanges are also convenient in pilot processes whose configuration is often changed.

Threaded Flange Advangtages

  • The main benefit is that that threaded seal eliminates the need for welding.
  • As they do not require welding they save time and money to install.
  • Allow for connections to be made in dangerous, explosive applications where welding is not possible.
  • Useful connection in materials that are difficult to create a successful and strong weld.
  • Ideal for connecting small diameter pipes.
  • Systems could be easily reconfigured.

Threaded Flange Disadvantages

  • They are not suitable where high temperatures, frequent cyclic conditions or bending stresses are likely in applications.
Fragen?

Unsere Materialexperten stehen bereit, Sie bei Ihrer spezifischen Anwendung zu unterstützen.

Kontaktieren Sie einen Experten