17-4PH bolts for high pressure sour gas well

Q: I’ve got in a high pressure sour gas well. We’ve been having trouble with 316 stainless steel components breaking. I need a solution but not sure what to use.
A: High pressures and sour gas combined can cause cracking and corrosion in most standard stainless and alloy steels. Depending on how severe the temperatures, pressure  and conditions are in your sour gas environment you there are two good options to consider. 
 
First there is 17-4 PH which is actually an age hardened form of stainless steel. It is widely used in sour gas wells and is about 4 times stronger than 316. Depending on the aging treatment it delivers between 125-200 ksi in ultimate tensile strength. While it has decent corrosion resistance, if corrosion is your main problem a different alloy may be better. 
 
Another option to consider for more extreme environments is MP35N. MP35N fastener are super in these environments because they have an unmatched combination of strength and corrosion resistance. MP35N has an ultimate tensile strength ranging from 227 ksi to 294 ksi (with age hardening).
This entry was posted in Application, High Strength and tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

Fragen?

Unsere Materialexperten stehen bereit, Sie bei Ihrer spezifischen Anwendung zu unterstützen.

Kontaktieren Sie einen Experten