Socket Head Cap ScrewGood Mid-Range Corrosion Resistant Alloy 

Also known as Carpenter 20 and 20CB-3, Alloy 20 socket head cap screws offer users a combination of nickel, chromium, molybdenum, and copper which provides good general corrosion resistance. Alloy 20 socket head cap screws are best suited for mid-range corrosion use – better than steel alloys but not at the level of high performance nickel based alloys like Hastelloy C276. Alloy 20 is a nickel alloy that was specifically designed to withstand the harsh environment of hot sulfuric acid but also performs well in a variety of other acids. Alloy 20 socket head cap screws are an ideal choice when you don’t need the corrosion resistance power and price-tag of high performance nickel alloys like Hastelloy C276; but you need something that will give you more protection than 316 stainless steel or even a Super Duplex 2507 stainless steel.

Corrosion Resistance
Alloy 20 socket head cap screws provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance. Alloy 20 offers solid acid protection and will perform better than Duplex or even Monel, but for high temperature and high concentration acids, you may need to look to Inconel or Hastelloy fasteners. In addition, Alloy 20 socket head cap screws also show useful resistance to phosphoric acid and nitric acid.

Key Corrosion Resistant Features:

  • Good sulfuric acid protection at 20% - 40%
  • Decent stress corrosion cracking, pitting and crevice corrosion resistance in chloride
  • Resonable general corrosion protection
  • Good intergranular corrosion resistance in the as-welded condition

Alloy 20 Chart v2

Mechanical Properties
•  Ultimate tensile strength: 80 ksi
•  Yield strength: 35 ksi
•  Density: 0.292 lb/in.3
•  Electrical Resistivity (RT) 651 ohm-cir mil/ft
•  Elongation: 30%

Temperature
In addition to their corrosion resistance, Alloy 20 socket head cap screws also perform well at moderately high temperatures, with the ability to maintain their mechanical strength up to 1000°F.

Welding
Alloy 20 socket head cap screws are stabilized with Columbium to minimize carbide precipitation during welding. In addition it offers intergranular corrosion resistance in the as-welded condition.

Applications
•  Power plants rely on alloy 20 socket head cap screws for flue-gas desulfurization
•  Alloy 20 socket head cap screws are used to connect heat exchangers, mixing tanks, metal cleaning equipment, pickling tanks and racks, and piping in mid-range corrosive chemcial processing environments.
•  Alloy 20 socket head cap screws help solve corrosion issues in food and dye production.
•  Manufacturers of plastics and synthetic rubber also utilize alloy 20 fasteners.

Resources: Alloy 20 Torque SpecsFlange DimensionsFlange Bolting Chart

Alloy 20 Screw Types: 12 Point ScrewsButton Head Cap ScrewsFlat Head ScrewsHex Head Cap ScrewsPan Head ScrewsSet ScrewsSocket Head Cap ScrewsTamper Resistant Security Screws, Torx Screws


Alloy 20 Socket Head Cap Screw Features and Benefits

When it comes to Alloy 20 socket head cap screws, it’s all about clearance. These screws are the best choice for applications with limited installation access or clearance. Yet if you have an application with a lot of debris, you may want to select a Alloy 20 hex head bolt or hex head cap screw, as they don’t have a socket drive which could get clogged.

Advantages:
•  Ideal for applications with limited access as they require very little clearance around the fastener.
•  Socket head cap screws can be used in locations where externally wrenched fasteners aren't desirable.
•  Weight reduction on application as Alloy 20 socket head cap screws are smaller – being that the cylindrical heads of socket screws need less space than hex heads and require no additional wrench space.
•  Also known for safety, reliability and economy.


Alloy 20 Chemistry & Specifications

Alloy 20 Specifications: UNS N08020, ASME SA240, , ASME SB366, ASME SB462, ASME SB463, ASME SB464,  ASME SB473, ASME SB729, ASTM A240, ASTM B366, ASTM B463, ASTM B464, ASTM B473, ASTM B729, ASTM BB462, ANSI/ASTM A555-79, EN 2.4660, , Werkstoff 2.4660, CN7M, DIN 2.4660

Chemistry Chart


Alloy 20 Sulfuric Acid Performance

 Alloy 20 Iso Sulfuric Acid 4 June 2021

Alloy 20 Sulfuric Acid Comparison

Iso Sulfuric Comparison Alloy 20 AL6XN 4

Sie sind sich nicht sicher, welches Material für Ihre Anwendung am besten geeignet ist?

Kontaktieren Sie einen Experten

Nutzen Sie unseren Materialselektor

 

Fordern Sie ein Angebot/eine Bestellung an

Anruf: 888-393-4517 oder Einen Antrag stellen
Fragen?

Unsere Materialexperten stehen bereit, Sie bei Ihrer spezifischen Anwendung zu unterstützen.

Kontaktieren Sie einen Experten